Jan 01

Latest Cisco ICND2 200-105 Exam Dumps – Exam2Pass Cisco experts provid

100% Valid dumps For Cisco 200-105 Exam Passing: Exam2pass have carefully complied realistic exam questions and answers,
in the newest version of 200-105 PDF dumps and 200-105 VCE dumps,
you will get all the new updated 200-105 exam questions, which will help you 100% passing 200-105 exam,
and you will get the free version of VCE simulator together with your 200-105 VCE dumps. Welcome to
visit our website — Exam2Pass.com and get your 200-105 exam passed easily!

We recommend that you have other effective Cisco ICND2 200-105 exam Dumps: Lead4pass 200-105 VCE dumps or PDF dumps, Lead4pass to help thousands of buyers who achieve Their goals.

Exam2pass offers the latest Cisco ICND2 200-105 practice test free of charge (10Q&As)

QUESTION 1
Which command can be used from a router to verify the Layer 3 path to a host?
A. tracert address
B. traceroute address
C. telnet address
D. ssh address
Correct Answer: B
Explanation

QUESTION 2
A network administrator has configured access list 173 to prevent Telnet and ICMP traffic from reaching a server with the address of 192.168.13.26. Which commands can the administrator issue to verify that the access list is working
properly? (Choose three.)
A. Router# ping 192.168.13.26
B. Router# debug access-list 173
C. Router# show open ports 192.168.13.26
D. Router# show access-lists
E. Router# show ip interface
Correct Answer: ADE
Explanation

QUESTION 3
Scenario
Refer to the topology. Your company has connected the routers R1. R2. and R3 with serial links. R2 and R3 are connected to the switches SW1 and SW2, respectively. SW1 and SW2 are also connected to the routers R4 and R5.
The EIGRP routing protocol is configured.
You are required to troubleshoot and resolve the EIGRP issues between the various routers.
Use the appropriate show commands to troubleshoot the issues.
<a href=c4s 200-105 exam question” width=”300″ height=”170″ class=”alignnone size-medium wp-image-1197″ />
Which path does traffic take from R1 to R5?
A. The traffic goes through R2.
B. The traffic goes through R3.
C. The traffic is equally load-balanced over R2 and R3.
D. The traffic is unequally load-balanced over R2 and R3.
Correct Answer: A
Explanation
Explanation/Reference:
Using the „show ip int brief command” on R5 we can see the IP addresses assigned to this router. Then, using the „show ip route” command on R1 we can see that to reach 10.5.5.5 and 10.5.5.55 the preferred path is via Serial 1/3, which we
see from the diagram is the link to R2.
exam2pass 200-105 exam question

QUESTION 4
Refer to the exhibit.
exam2pass 200-105 exam question
Assuming that the entire network topology is shown, what is the operational status of the interfaces of R2 as indicated by the command output shown?
A. One interface has a problem.
B. Two interfaces have problems.
C. The interfaces are functioning correctly.
D. The operational status of the interfaces cannot be determined from the output shown.
Correct Answer: C
Explanation
Explanation/Reference:
R2 has setup with two interface s0/1 and fa0/0 and both are interfaces configured with IP address and up. „show ip interface brief” showing the status of R2 interfaces.

QUESTION 5
Scenario
Refer to the topology. Your company has connected the routers R1. R2. and R3 with serial links. R2 and R3 are connected to the switches SW1 and SW2, respectively. SW1 and SW2 are also connected to the routers R4 and R5.
The EIGRP routing protocol is configured.
You are required to troubleshoot and resolve the EIGRP issues between the various routers.
Use the appropriate show commands to troubleshoot the issues.
exam2pass 200-105 exam question
Study the following output taken on R1:
R1# Ping 10.5.5.55 source 10.1.1.1
Type escape sequence to abort.Sending 5.100-byte ICMP Echos to 10.5.5.55, timeout is 2 seconds:
Packet sent with a source address of 10.1.1.1
Why are the pings failing?
A. The network statement is missing on R5.
B. The loopback interface is shut down on R5.
C. The network statement is missing on R1.
D. The IP address that is configured on the Lo1 interface on R5 is incorrect.
Correct Answer: C
Explanation
Explanation/Reference:
R5 does not have a route to the 10.1.1.1 network, which is the loopback0 IP address of R1. When looking at the EIGRP configuration on R1, we see that the 10.1.1.1 network statement is missing on R1.
exam2pass 200-105 exam question

QUESTION 6
exam2pass 200-105 exam question
exam2pass 200-105 exam question
Which connection uses the default encapsulation for serial interfaces on Cisco routers?
A. The serial connection to the NorthCoast branch office.
B. The serial connection to the North branch office.
C. The serial connection to the Southlands branch office.
D. The serial connection to the Multinational Core.
Correct Answer: B
Explanation
Explanation/Reference:
Cisco default encapsulation is HDLC which is by default enabled on all cisco router. If we want to enable other encapsulation protocol (PPP,X.25 etc) we need to define in interface setting. But here except s1/1 all interface defined by other
encapsulation protocol so we will assume default encapsulation running on s1/1 interface and s1/1 interface connected with North

QUESTION 7
Which statement about access lists that are applied to an interface is true?
A. You can place as many access lists as you want on any interface.
B. You can apply only one access list on any interface.
C. You can configure one access list, per direction, per Layer 3 protocol.
D. You can apply multiple access lists with the same protocol or in different directions.
Correct Answer: C
Explanation

QUESTION 8
After the network has converged, what type of messaging, if any, occurs between R3 and R4?
A. No messages are exchanged.
B. Hellos are sent every 10 seconds.
C. The full database from each router is sent every 30 seconds.
D. The routing table from each router is sent every 60 seconds.
Correct Answer: B
Explanation
Explanation/Reference:
HELLO messages are used to maintain adjacent neighbors so even when the network is converged, hellos are still exchanged. On broadcast and point-to-point links, the default is 10 seconds, on NBMA the default is 30 seconds.

QUESTION 9
exam2pass 200-105 exam question
exam2pass 200-105 exam question
To allow or prevent load balancing to network 172.16.3.0/24, which of the following commands could be used in R2? (Choose two.)
A. R2(config-if)#clock rate
B. R2(config-if)#bandwidth
C. R2(config-if)#ip ospf cost
D. R2(config-if)#ip ospf priority
E. R2(config-router)#distance ospf
Correct Answer: BC
Explanation
Explanation/Reference:
OSPF Cost
http://www.cisco.com/en/US/tech/tk365/technologies_white_paper09186a0080094e9e.sht ml#t6
The cost (also called metric) of an interface in OSPF is an indication of the overhead required to send packets across a certain interface. The cost of an interface is inversely proportional to the bandwidth of that interface. A higher bandwidth
indicates a lower cost. There is more overhead (higher cost) and time delays involved in crossing a 56k serial line than crossing a 10M ethernet line. The formula used to calculate the cost is:
cost= 10000 0000/bandwith in bps
For example, it will cost 10 EXP8/10 EXP7 = 10 to cross a 10M Ethernet line and will cost 10 EXP8/1544000 =64 to cross a T1 line.
By default, the cost of an interface is calculated based on the bandwidth; you can force the cost of an interface with the ip ospf cost interface subconfiguration mode command.

QUESTION 10
exam2pass 200-105 exam question
exam2pass 200-105 exam question
What would be the destination Layer 2 address in the frame header for a frame that is being forwarded by Dubai to the host address of 172.30.4.4?
A. 825
B. 230
C. 694
D. 387
Correct Answer: C
Explanation
Explanation/Reference:
According to command output 172.30.4.4 is using the 694 dlci value. http://www.cisco.com/en/US/docs/ios/12_2/wan/command/reference/wrffr4.html#wp102934

[Official recommendations]
200-105 ICND2 – Cisco:https://www.cisco.com/c/en/us/training-events/training-certifications/exams/current-list/200-105-icnd2.html

Exam2Pass is now here to help you with your Cisco 200-105 exam certification problems. Because we are the best 200-105 exam
questions training material providing vendor, all of our candidates get pass Cisco 200-105 exam without any problem.